Volume 10 | Issue 6 |

 Abstract

Bone fractures are the major and common issues faced by many people. These fractures often occur during accidents. To predict these fractures doctors are using x-rays. Sometimes it is difficult to predict whether it is fractured or not through the x-rays manually. These x-rays show a clear picture of the damage but the main issue is that some physicians are overlooking the small fractures which may cause a lot of damage in the future to that particular person. Model which analyses and classifies the images of hand, leg, chest, fingers and wrist fractures in a clear way. There are many other techniques to detect these fractures and this project is molded by using some artificial intelligence applications using machine learning and deep learning techniques. This project investigates specifically various models dependent on Convolutional Neural Networks which helps us to provide a better solution as it is a step-by-step process of image analyzing algorithm to predict whether the bone is fractured or normal. By comparing 3 types of CNN models which are ConvNet/CNN, VGG16 & R-CNN with the same image dataset, R-CNN gave the best accuracy.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Convolutional Neural Networks, Machine Learning, algorithm, Fractures, Bones, Accidents, Doctors, X-Rays.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The compact antenna for on-body applications is designed for covering ISM frequency bands. The antenna covering ISM frequency bands in range of 2.45 and 5.8 GHz. The circular structure with triangular slots is responsible for obtaining the dual band applications. The antenna designed on flexible polyimide substrate having dielectric constant of 3.5 with loss tangent of 0.008. The bending analysis of the antenna is performed to analyze the flexible nature. The proposed antenna covering the frequency range 2.3-3.5 GHz and 5.1-6.8 GHz with fractional bandwidth of 41% and 28%. The antenna provides the stable dipole and omnidirectional patterns. The measured antenna provides the peak gain of 2.3 dBi at 2.5GHz and 4.7 dBi at 5.8 GHz radiation efficiency of 78% at 2.5 GHz and 84% at 5.8 GHz. To validate the antenna performance antenna undergone for the comparison of simulated and measured results by placing antenna on human body.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Specific absorption rate, On-body applications, Circular Ring

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

ESP32, NODEMCU, Internet of Things (IoT), MAX30100 sensor, GPS Module, LM35, BMP180, BLYNKAPP, Arduino IDE

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Induction heating, VFSRI, Zero- Voltage Switching, Zero- Current Switching, Matching transformer.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

We found that a significant extent of people in general in China has a clear expectation to get the COVID-19 antibody; a higher extent communicated a plausible goal. Seen advantages and boundaries to inoculation (antibody adequacy and unfavorable occasion worries) of the wellbeing conviction model develops were critical indicators of COVID-19 immunization purpose. To a significant extent I was worried about phony or broken COVID-19 antibodies; in any case, this was not a critical indicator of immunization aim. The eagerness to pay for the COVID was not entirely set in stone and was viewed as emphatically connected with pay. Higher trust in locally made COVID-19 immunizations was likewise found in this review. The inclination for locally made over unfamiliar made COVID-19 immunizations proves that a future COVID-19 antibody created by homegrown organizations will get an ideal reaction from the general population in China. The discoveries of this study give helpful direction to fitted mediations to upgrade the acknowledgment of another COVID-19 antibody once it is accessible. Special messages outlining the advantage of immunization and worries about new antibody wellbeing to upgrade antibody take-up is justified.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Covid-19, vaccinations, linear regression, graphs

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Present examination estimated sugar content in extracted juices of four different fruits (grapes, orange, pineapple, and watermelon) available in the local market. For this work, Fehling's solution was standardized by using glucose and then estimated the reducing and non-reducing sugar of samples by titrimetric analysis. The sugar content of different samples was compared by drawing a bar diagram. From my analysis, it is clear that almost all fruits contain a considerable amount of sugar. Orange was formed to be the richest source of sugar and watermelon the least. The amount of sugar and relative proportions present in various fruits depend on their nature and degree of maturation.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Reducing sugar, Non-reducing sugar, Different fruits, Glucose, Fehling's solution Methylene blue, Titration, Bar diagram.,

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Diabetes mellitus is caused by decreased insulin secretion. The people throughout the world increasingly affected by diabetes mellitus, a global problem. Due to side effects and other reasons usage of oral hypoglycemic agents is reduced. Globally, there will be an increase in the usage of herbal medicines for treating various diseases was reported. According to WHO all herbal medicines should be scientifically evaluated for their activities. In India from ancient time onwards herbal medicines were used to cure many diseases. Diabetes mellitus is cured by many medicinal plants. Many formulations were also formulated to treat diabetes mellitus but there is a lack of scientific validation so, the aim of this study is to select and scientifically validate a traditional polyherbal formulation. This review work is a small step towards scientifically studying the traditional polyherbal antidiabetic formulation, so as to standardize and improve the formulation for the benefit of humankind. traditional polyherbal formulation. This review work is a small step towards scientifically studying the traditional polyherbal antidiabetic formulation, so as to standardize and improve the formulation for the benefit of humankind. This dreadful disease is found in all parts of the world and is becoming a serious threat to mankind health. It is caused by the deficiency or ineffective production of insulin by pancreas which results in increase or decrease in concentrations of glucose in the blood. There are lots of chemical agents available to control and to treat diabetic patients, but total recovery from diabetes has not been reported up to this date.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Antihyperglycemic, antioxidant, metformin, streptozotocin, Diabetes mellitus

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The Go-kart Vehicle is made with Four tires, a seat, steering, and brakes, and without suspension and differential. Racing go-karts are vehicles with very low ground clearance that can be used only on level circuits. This gokart was designed and analysed using an electric motor. These calculations and analyses show the details of the design and analysis. We aim to reduce weight and improve performance. It was decided to use AISI 4130 for making the chassis frame. An analysis of the part was then performed with Solidworks2018 CAD software following the 3d solid modelling step. In addition, analyse the deformation of the chassis in front, side, and rear impacts. Ackerman angles are provided on all steering systems. The caster angle is 11 degrees and the kingpin inclinations are 6 degrees, respectively. Due to maximum deformation of 2.481.and the maximum factor of safety of 15 and the maximum stress 337.84.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

material used AISI4130, impact test, chassis frame, battery cell, electric motors, factor of safety

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Cefixime, Efficacy, Safety, Community-acquired pneumonia ,systematic review.

  License

Creative Commons Attribution 4.0 and The Open Definition