Volume 10 | Issue 6 |

 Abstract

This project represents the structural behaviour of RCC twisted building subjected to seismic loads with private swimming pool using ETABS. In this paper various angles of twist and positions of swimming pools for RCC twisted building are analysed. The different rate of twist 1.5, 2, 2.5, 3, 3.5, 4, 4.5 and 5 degree per floor and three cases of swimming pool positions (every floor, alternate floor, specific floor) for twisted building are considered. The modelling and analysis is done using ETABS. Response spectrum method is used for analysis and the results obtained are plotted for parameters such as storey displacement, storey drift and base shear

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

ETABS, Response spectrum method, Swimming pool, Seismic analysis, Twisted building

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Create a novel network model for mobile ad hoc network (MANET) nodes and actors in wireless sensor networks to collaborate on event processing. There are two stages in the development of distributed algorithms: setup and negotiation. The first uses weighted proportional max-min fairness to initially allocate MANET nodes across event zones, whereas the latter uses a market-based method to re-distribute the number of MANET nodes based on existing and new events. A detection technique for malicious packet dropping attacks in MANETs. The mechanism of the suggested approach is Collaborative Convolutional Neural Network (CCNN), which is based on the reputation value computed for that node by its neighbours. A node's reputation value is determined by its network packet forwarding behaviour. The reputation information is collected, saved, and transferred between nodes before being calculated under various scenarios. A network simulator was used to test the proposed protocol. The simulation results demonstrate the effectiveness of its performance. Even in the presence of cryptographic procedures, our method incurs negligible network bandwidth and latency costs. Moreover, we demonstrate that the protection is still effective in the presence of misbehaving nodes and routing changes caused by mobility. While further research is needed to thoroughly evaluate our method, we feel that the concept of collaborative security in MANETs is a potential future area.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

MANET, TCP/IP, CCNN, ADHOC

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Abstract- Bi-layer tablet is a new era for the successful development of controlled release formulation along with various features to provide a way of successful drug delivery system. Bi-layer tablet is suitable for sequential release of two drugs in combination, separate two incompatible substances and also for sustained release tablet in which one layer is immediate release as initial dose and second layer is maintenance dose. Bi-layer tablets has been developed to achieve controlled delivery of different drugs with pre defined release profiles. In the last decade interest in developing a combination of two or more API's in a single dosage form has increased in the pharmaceutical industry, promoting patient convenience and compliance. Several pharmaceutical companies are presently developing bi-layer tablets, for a variety of reasons patent extension, therapeutic, marketing to name a few. To decrease capital investment, quite often existing but modified tablet presses are used to develop and produce such tablets. This article explains about different techniques of bi-layer tablet and why development and production of quality bi-layer tablets need to be carried out on purpose built tablet presses to conquer common bilayer problems, such as layer separation, insufficient hardness, inaccurate individual layer weight control, cross contamination between the layers, reduced yield etc. There are various applications of the bi-layer tablet consists of monolithic partially coated or multilayered matrices.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Keywords: Bilayer tablet manufacturing; Delamination; Interfacial strength; Layered tablets; Tablet compression.30-Jan-2014

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The present conceptual paper focuses on the evolution of the teaching-learning process from objectivism to constructivism through structuralism; functionalism and behaviourism finally leading from the transitory phase of cognitivism to the radiant phase of constructivism. It talks about how augmented reality is ahead of VR and the revolutionary impact it may entail. Paper gives an overview of the basic tenets of every school including its main idea, teaching method(s), and evaluation tools. It covers various aspects and activities in the B.Ed curriculum which reflect constructivism. It also offers a hopeful vision of reforming evaluation techniques. The paper presents a model of the journey of teaching-learning from Objectivism to Constructivism and in conclusion talks about how AR is the reality of tomorrow.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Structuralism, Objectivism, Constructivism, Augmented Reality, Discovery Learning, Experiential Learning, Virtual Reality, Journey of teaching-learning

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Transportation has become an essential medium in todays life, it has become a daily routine of many people ,among those transportation medium is railway this project is mainly focuses on automation in the field of railway and i.e automatic railway gate control using Arduino uno, buzzer ,led,ir sensor etc.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Arduino Uno, GSM,DC Motor.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Democracy in any country should have a transparent voting system that addresses the people's issues to provide the capacity to the right person. Besides, the current traditional voting systems experience the ill effects of significant disadvantages and missing the absence of security and transparency. I proposed some strategy which recommends a system with the utilization of practicable hashing methods to keep up with information security. Square creation and square fixinghelps to make the block chain coordinated. This is prescribed to utilize helpful blockchain, and that implies that an administrating entity possesses the block chain (e.g., political decision commission), so subsequently no unapproved access might be made from outside. The structure proposed examines the viability of the polling process, hashing algorithms' utility, block creation and sealing, data accumulation, and result statement by utilizing the adjustable blockchain method.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Block chain, Vote Identification Token, Cryptographic algorithm, Image comparison and QR-Code

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

COVID-19 began in China in December 2019. As of January 2021, over a hundred million instances had been reported worldwide, leaving a deep socio-economic impact globally. Current investigation studies determined that artificial intelligence (AI) can play a key role in reducing the effect of the virus spread. The prediction of COVID-19 incidence in different countries and territories is important because it serves as a guide for governments, healthcare providers, and the general public in developing management strategies to battle the disease. The prediction proved beneficial in the early months of 2020 to alert nations and territories in danger of an outbreak, allowing them to take preventative measures. Despite the fact that the COVID-19 outbreak has expanded to practically every location on the planet, the prediction has value in terms of monitoring the intensity of the spread and recovery, as well as determining the likelihood of a sequel or tertiary epidemic. COVID-19, like influenza, could become a seasonal or recurring epidemic in the future. COVID-19 activity must so be predicted and monitored now and in the future.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Machine learning, Cloud computing

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Growing population in metro towns is leading to huge vehicle density, the problems for car parking has become an unending question. Centralized car parking systems have been set up to avoid roadside parking and other related traffic problems.In many cities, car drivers look for a parking slot during rush hours or during traffic jams. This app presence an efficient method to check the availability of the parking slot and to reserve a slot.Existing work will focus solely on parking slot availability. However in this fast paced world drivers cannot confirm whether a parking slot is available as per the demand.To conquer this disadvantage, clever parking with reservation cell primarily based totally surroundings is proposed. This will make it easier for motorists to park their vehicles and avoid traffic jams. Drivers can provoke the request the usage of the reservation app on Android mobile to decide the provision of a parking slot.The driver can reserve the slot through the online payment system if the slot is available. The proposed system also allows drivers to cancel a reserved parking slot. The amount will be refunded after cancellation charges.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Parking Slot, Traffic Congestion, Vehicles, Reservation Slot

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The objectives of this project are assessment between ETAB software and manually designs. The design includes load calculations and analyzing the whole structure by ETAB. The design methods used in ETAB analysis are Limit State Design conforming to Indian Standard Code of Practice. These involve ETAB Modelling, Study the members due to the effect of Wind (WL) & Seismic load (SL) & compare them for a 30 m height Building with Cement Concrete, Rebar & Steel construction. The proposal structure is a G+10 storied building with 3.00 m as the height to each floor. The overall plan dimension of the building is 21.50 m x 14.5m.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Multi-storeyed building, wind effect, seismic effect, manually calculation, Steel and cement concrete composite structure and ETAB.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Different epidemiological studies have shown that type 2 diabetes is associated with a 2-to-3-fold increased risk for sudden cardiac death. This system proposes a new scheme to detect the possibilities for the cardiac arrest based on the diabetic patients socioeconomic profile and their activities. The algorithm analyses to find a subset of instances that are the best fit and based on that is able to predict the outcome. Initially user should register in this application with basic personnel details. After completion of successful registration, user should login into this application with registered user name and password. Login authenticated users will get the home page to enter their health related details to predicting the risk factor level for cardiac arrest or heart related problems. Age, Gender, Smoking habit, Obesity, Alcohol intake, High salt diet, High saturated fat diet, Physical activity with exercise detail, Sedentary life style, Bad cholesterol, Blood pressure, Blood sugar and Heart rate are the required data to predict the risk factor for the cardiac arrest using rule mining. This project is to be developed using Python with Scikit-learn as front end and MySQL as back end. Scikit-learn machine learning library for Python.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Diabetic to Cardiac, Rule based classification, Risk factor

  License

Creative Commons Attribution 4.0 and The Open Definition