Volume 10 | Issue 6 |

 Abstract

Steering is a basic function that ensures the wheels point in the right direction. This is usually achieved using a series linkages, rods pivots and pivots. One of the most basic concepts is the caster angle. Each wheel is steered with an initial pivot point before the wheel. This allows the steering to be self-centring in the direction of travel. A shaft connected to the steering column turns a wheel when the driving force turns it. The gear mechanism turns tie rods that connect to the front wheels. To turn the vehicle to one side, the tie rods move the front tires. The steering mechanism should provide control over vehicle direction, good maneuverability, and smooth recovery from turns. Because the driver releases the steering lever, the steering mechanism also must transmit minimal road shocks to the pavement. The steering mechanism controls the vehicle's direction, provides good maneuverability, smooth recovery after turns, and transmits minimal road shocks.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

steering mechanism, gear mechanism.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The report presents a strategy for social distancing detection, the unprecedented outbreak of the 2019 novel coronavirus, termed as COVID-19 by the globe Health Organization (WHO), has placed numerous governments round the world in an exceedingly precarious position. The effect of the COVID-19 outbreaks, in advance witnessed through the residents of China alone, has now become a matter of grave concern for virtually every country within the world. The shortage of assets to undergo the COVID-19 outbreak mixed with the worry of overburdened healthcare systems has forced a majority of those countries into a state of partial or complete lockdown. The number of laboratories confirmed coronavirus cases has been increasing at an alarming rate throughout the planet, with reportedly quite 2.2 million confirmed cases as on 20 April 2020. So, maintaining social distancing is incredibly important. to gauge the space between people to mitigate the impact of this coronavirus pandemic. The detection tool was developed to alert people to take care of a secure distance with one another by evaluating a video feed. The video frame from the camera was used as input, and therefore the open-source object detection pre- trained model supported the YOLOv3 algorithm was employed for pedestrian detection. Later, the video frame was transformed into top-down view for distance measurement from the 2D plane. the gap between people is often estimated and any noncompliant pair of individuals within the display are going to be indicated with a red frame and line. The proposed method was validated on a pre-recorded video of pedestrians walking on the road. The result shows that the proposed method is ready to work out the social distancing measures between multiple people within the video. The developed technique will be further developed as a detection tool in real-time application.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

covid, social distancing, yolo

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

A study was conducted at JNTU, Kakinada, Andhrapradesh aiming to achieve the main objective of comparing the coordinative ability male and female Football interuniversity players. It also includes the rhythmic ability, differentiation ability and orientation ability between male and female Football interuniversity players. The study conclude that male interuniversity players possessed better rhythmic ability. It also concludes that there was no difference in terms of differentiation and orientation ability between male and female interuniversity Football players.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Keywords: Rhythmic ability, differentiation ability, orientation ability, sportsperson, Football.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The purpose of this study is to find out the most possible factor which causes incident in the process industry and thus affecting the safety management in the process industry. The most common feature among the best known companies in the world is safety. In fact, process safety and manufacturing productivity go hand in hand. In the last century, a number of catastrophic accidents have drawn the attention of regulators towards process safety. In several developed, industrialized countries, strict regulations and standards are applied to emphasize process safety. In fact, in such countries, these are the required minimum for maintaining business license and permits. However, in developing and in under developed nations, the issue of process safety and their importance is still being debated. Process safety cannot just be driven by a set of rules, regulations, policies, etc. Multitudes of items are required in establishing and maintaining a safe and a reliable work environment. Such items, though can be expressed readily in paper, are quite arduous to establish in a highly competitive environment. The legislation, the government regulations, banking policies, management commitment, cumulatively share the responsibility in establishing organizations judiciously managing process safety. This paper reviews certain critical aspects in establishing a successful process safety management (PSM) program. Furthermore, the paper reviews the various elements that contribute towards the creation of a worthwhile PSM program.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Process Safety, PSM program & Plants safe

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Phyllanthus reticulatus (Family: Euphorbiaceae) is commonly a condensed deciduous shrub through a distinctive fragrance. Subsequently centuries, the shrub has been utilized for the cure of innumerable ailments. Present investigation deals with the evaluation of the physicochemical activity of extracts of vegetative parts leaves, stem and root of Phyllanthus reticulatus (Poir) rendering to the ordinary techniques. Consumption of the plant for remedies of countless diseases is stated in Ayurvedic book alike Charaka Samhita. Nevertheless there was no enough information concerning about all organs of the plant. Therefore the existing comparative analysis was planned and accompanied to estimate the physicochemical evaluation of stem, leaf and root of Phyllanthus reticulatus (Poir). The present experiment exposed to the bio searching of diverse plant parts of leaf, stem and root of Phyllanthus reticulatus (Poir) for several therapeutic ideologies in addition to properties

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Phyllanthus reticulatus, Physicochemical evaluation, Extract, Leaves, Stem, Root

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

ABSTRACT: - Green marketing is perceived to be a tool towards sustainable development as pollution levels are getting worse day by day, which will eventually lead to the perpetual deterioration of human life. Green marketing is not only a promotional activity. It creates awareness among the people about environmental pollution. People come to know their role in environmental pollution. Green products are more healthiest products, because it does not harm peoples health and environment. With the help of green marketing people will understand green products are better than existing products. Green marketing is a socio friendly and environment friendly practices. But it also face some issue. So this study will help in identifying those issues. Previous studies about this area is comparatively less. The study will help in improving and developing the idea of green marketing. Ultimately it will help in protecting the environment.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The most powerful and dominant force in modern times is that of nationalism. Nationalism, which emerged in 19thcentury, became a more powerful factor in the 20thcentury and came to be taken for granted almost everywhere like water and air. In fact, the very basis of modern state is nationalism. Whatever may be its demerits, "Nationalism still enjoys greater support and acceptance all over the world than any religion". People are ready to shed their blood and undergo any amount of sufferings for the cause of nationalism. Nationalism implies a group feeling directed towards a set of values, which are considered unique and valuable. The people who feel that they have their common, unique social heritage, their art and literature generally develop the feeling of nationalism. In other words, nationalism is a feeling of oneness arising from historical, political, religious, linguistic, racial, psychological and other factors in the nation. Therefore, nationalism is a spiritual and psychological feeling of unity having its root in the common past. Nationalism adds to the material advancement of the people, by creating a healthy spirit of national rivalry. It faster the spirit of nationality and it has developed the community spirit among the people. Nationalism enables the nation to have an independent existence. It develops and promotes patriotism. It calls for the best efforts of the people for progress and great sacrifices in the cause of the nation. By encouraging the nation in the world to out beat the others in economic and scientific developments, it adds to the progress of humanity in general. It checks the tide of imperialism. It strengthens democracy and helps to establish a strong, stable government. It inspires poets, writers, painters, musicians, historians, scientists, researchers, sportsmen and the like. Nationalism opposes slavery and foreign domination. Hence, it encourages the people to free themselves from the domination of foreign rule. It is under this spirit of nationalism that India attained its independence.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Nationalism, Growth, Karnataka, British, Mysore Kingdom, Hyderabad Karnataka, Bombay Karnataka

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Disability, abuse, mean comments, forest, solace

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

CPU scheduling, also known as process scheduling, is one of the most important features within an operating system that guarantees multiprogramming where a number of programs would be competing for computer resources at the same time in the system. In this paper we are trying to study and compare various types of known CPU scheduling algorithms namely First Come First Serve (FCFS), Round Robin (RR), Shortest Job First (SJF), Priority and Shortest Remaining Time First (SRTF) scheduling. Which one to use out of these algorithms totally depends on types of process running on the system, CPU utilization, throughput, waiting time, response time needed etc. Sometimes, more than one of these algorithms will be used within same system in different situations. In this paper we will try to test these scheduling algorithms and summarize which one performs better in what situation.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

FCFS, SJF, SRTF, PS, RR, FIFO, Ms, AWT, TAT,CT,OS,PCB,I/O

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

In Electric automobiles can help reduce greenhouse gas emissions. EVs not only reduce reliance on fossil fuels, but they also reduce ozone-depleting compounds and promote large-scale renewable deployment. The study of electric vehicle attributes and characteristics, as well as charging infrastructure and charging capacity. The automotive industry has entered a new phase in the production of more fuel-efficient, low-emission vehicles and innovative technology in response to environmental concerns regarding pollution and the conservation of fuel supplies worldwide. Hybrid Electric Vehicle is among the finest innovations (HEV). The hybrid electric vehicle utilizes multiple energy sources for entire propulsion. In this project, two independent propulsions, an internal combustion engine (ICE) and an electric motor, are independently operated for combined effort derivation in total vehicle propulsion A hybrid vehicle addresses these issues by combining the benefits of both systems and utilizing both power sources under their optimal conditions. Using cutting-edge technology, this proposed solution intends to improve fuel utilization and reduce dependence on nonrenewable resources. The implementation includes the creation of a hybrid electric vehicle (HEV) that employs both battery and petrol power for propulsion. It cuts air and noise pollution by 50 percent while operating as an electric hybrid vehicle (non-polluting). HEVs combine the advantages of high fuel economy and minimal tailpipe emissions with conventional vehicles' power and range. By driving the fabricated two-wheeler in engine mode, electric mode and hybrid mode, the performance of the bike is tested and analyzed by comparing with the conventional vehicle.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Vehicle,Converter,battery, Controller, Hub motor

  License

Creative Commons Attribution 4.0 and The Open Definition