Volume 13 | Issue 2 |

 Abstract

All humans now consider cleaning to be a basic requirement, and it is an inevitable daily ritual. The most common locations for the traditional road cleaning machine are bus stands, airports, train stations, and hospitals. These locations also require electricity to run the equipment. It is neither environmentally friendly nor user-friendly. There is a power outage during the summer, and as a result, most road cleaning equipment is not used efficiently. We are employing inexpensive, readily available materials for our project. It is a superior substitute for a traditional machine.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Design and Fabrication, Eco-Friendly cleaner, Road safety and hygiene

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

A computational capability is evolved for the gold standard design of radial drilling gadget shape to satisfy static stress and natural frequency necessities the use of finite element idealization. The radial drilling device structure is idealized with body elements and is analyzed by way of the usage of specific combos of move sectional shapes for the radial arm and the column. From the consequences acquired, the best mixture of cross sectional shapes is recommended for the structure. With this mixture of cross sectional shapes, mathematical programming strategies are used to find the minimal weight design of the radial drilling device shape. A sensitivity analysis is carried out about the most excellent factor to locate the consequences of adjustments in layout variables on the structural weight and the reaction quantities.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

3D Modeling in CREO parametric software program and evaluation in ANSYS software.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This project describes the concept, design and prototype implementation of a wheeled pole-climbing-robot based on Ferromagnetic adhesion. Pole climbing robots have become an interesting area for research in the last years. Several robots have been developed to solve this given problem. Every construction has its own advantages and disadvantages. The goal of this work was to design another pole climbing robot that uses a ferromagnetic adhesion principle. It was not the forceful goal to create a fully optimized working robot but rather to learn the design and construction steps, which are needed for a new product from the engineering point of view.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Wall Climbing Robot, Magnetic Adhesion, Adhesion-Locomotion, Surface Inspection, Pipe Robot.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The pipe cutting process is a main part of all industries. Normally the pipe cutting machine is manually hand operated one for medium and small scale industries. Automation in the modern world is in inevitable. Any automatic machine aim at the economical use of man, machine, and material worth the most. In our project is solenoid valve and control timing unit is used for automation .The pipe cutting machine works with the help of pneumatic double acting single cylinder .The piston is connected to the moving cutting tool .It is used to cut the small size of the pipe. The machine is portable in size, so easy transportable. A compress air from compressor is used as force medium for this operation. There are pneumatic double acting cylinders, solenoid valve, flow control valve and timer unit is used. The arm from the compressor enters to the flow of control valve. The control air from the flow control valve enters to the solenoid valve. The function of solenoid valves all of air correct time interval. The 5/2 solenoid valve is used In one position air enters to the cylinder and pushes the piston so that the cutting stroke is obtained. The next position air enters to the other side of cylinder and pushes the piston return back, so that the remaining stroke is obtained .The speed of cutting releasing stroke is varying by the timer control unit circuit.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Automation, Compressor, Solenoid vavle, Pneumatic.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

In Lubrication process lubricant is used as fluid in machining process can reduce the cutting temperature and provides the lubrication to work piece and tool .These increase the long life of the tool and good surface quality. There are many types of lubrication system is used in industry. This paper is review of Automatic Lubrication System which is used in industry. This system delivers controlled amount of lubricant to multiple location on a machine parts while the machine is working. The lubrication consists of greasing oil to different greasing points. This study involves with design and manufacturing of automatic lubrication system. This system gives safety to part and worker and it also minimize manpower required for lubrication system. Damage due to large greasing to part can be stopped. This paper also describes the parts which are used to construct of Automatic Lubrication System.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Double acting pneumatic cylinder, Grease gun, Solenoid valve, Digital timer, connecting rod.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This paper discusses design and fabrication of "Slotting/ Milling Attachment to Lathe". It is well known that lathe is considered to be a versatile machine in which several capabilities of machining are inbuilt. To further enhance its versatility, in this research, an attachment is designed and fabricated to add the capability of horizontal milling machine in lathe. A milling cutter is mounted in a cutting arbor, which in turn is mounted between the headstock and the tailstock of a lathe. A work holding device is designed and mounted on the tool post. With this arrangement, it is possible to do keyway cutting in a shaft or milling a plane surface on a work piece. This research is considered to be a milestone in the direction of increasing the capability of the machine tool like lathe.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Milling, Slotting, Lathe, Attachment, Enhancement of Lathe Features.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The automatic rain sensing car wiper system is used to detect rainfall and it is used to activate any automobile's rain wipers without driver interaction. The system was developed to avoid driving distractions and hence allow the drivers to focus on their primary task of driving. The distraction get rid with the development of this product is the manual adjustment of windshield wipers when driving in precipitation. The few seconds that a driver takes their attention off the road to adjust a knob while driving in poor weather conditions could potentially lead to car accidents. So to avoid this type of accidents automatic car wipers can be used.The automatic car wiper system uses a combination of impedance and Impedance sensor to detect rain and its intensity. The system contains a controller that takes in the input signals from the sensors and the sensor senses the water drop or moisture and then controls the operation of the windshield wipers based on those input signals. The prototype demonstration shows the basic operation of the system in standard conditions. Thus the system responds successfully to rain drops or simulations within the specified amount of time

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Rain sensor, Microcontroller, Arduino, Servo Motor.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This project presents the concept of two directional operating machine mainly carried out for production-based industries. Industries are basically meant for production of useful goods and services are low production cost machinery and low inventory cost. Today in this world every task has been made quicker and fast due to technology advancement but this advancement also demands huge investment and expenditure, every industry desire to make high productivity rate maintaining the quality and standard of the product at low average cost.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Scotch yoke Mechanism, Dual shaper, Belt, Single point cutting tool

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This project work titled" INVOLUTE GEAR PROFILE ERROR DETECTOR BY USING DIAL GAUGE "The aim of the project is to check the error detection by applying the basic principle of involute generation. Usually when the gears have any defects it produces more vibration. In order to rectify the vibration we have planned to design and fabricate the involute gear profile error detector. The main part of the involute gear profile error detector is the base circle disc in which the gear is mounted. The gear is locked by means of locking arrangement which has a shaft and it is coupled to the bearings. The whole locking arrangement is coupled by means of a locking screw arrangement called locking handle which can be able to rotate manually. It consists of the actuating rod which is situated between the baseplate and locking arrangement. The function of the actuating rod to hold the base plate tightly. In this project spur gears are designed. The program is a user friendly one and when executed it is ask the inputs and performs the necessary design calculation and gives necessary output values. It also gives the gear tooth profile with accurate safe dimensions.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

DEVELOPMENT OF INVOLUTE GEAR ERROR DETECTOR

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

In standard two-wheel steering vehicles, the rear wheels do not play any role in association with the steering and follow the path of the front wheels. In four wheels steering the wheels can be rotated either left or right as per the requirements. Rear wheels can be rotated in same direction as the front or in opposite direction. The four-wheel system is designed to function in 3 modes namely, in-phase rotation, counter-phase rotation and zero rotation. The steering systems are designed to give the best control designed for the vehicle. The vehicles are designed with steering control to the front wheels or in certain cases steering control is given to the rear wheels. The dual axle steering system shows the working of different motion of wheels with respect to various turning arrangements.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Design and fabrication of Dual Axis Vehicle Steering Mechanism

  License

Creative Commons Attribution 4.0 and The Open Definition